Step 1. You should take off the bathroom with your painters tape. Take the tape around all of the surfaces that you do not wish to be painted. Make sure to tape off the ceiling as well. Press the tape firmly as not to have the paint bleeds.
Step 2. Shake the paint bucket and then stir the paint with the stirrer. Make sure that the paint is completely mixed before you use it. Pour a small amount of paint onto the painters tray. Go ahead and dip the tip of the brush into the paint until completely submerged. Be careful not to get the paint past the brushes bristles.
Step 3. You are now ready to begin to outline the room. This is the most difficult task. Use the smaller paint brush to get close to the ceiling, the toilet, the sink, the shower, and the other areas that you are outlining. Do your best not to touch these surfaces with the brush. If the surface was touched, don’t panic. Do your best to remove the paint while it is still wet. After the outlining is finished then you can go over the remaining larger areas with your roller. This will cover more quickly.
Step 4. After the outlining is finished then you can go over the remaining larger areas with your roller. This will cover more quickly. Dip your roller into the paint in the painters tray. Roll the roller until completely covered with paint. Transfer the roller onto the wall from the painters tray.
Step 5. You are now almost finished. Now all that is left is your touch ups. You may want to leave the room and come back with fresh eyes. This way when you walk back into the room you can see if you have missed any areas. Take either your brush or your roller and go over the bare areas. Wait for the paint to dry. Pull off the tape and voila! you have yourself a freshly painted bathroom.
Tips and warning:
– Pay the extra money for brand name paint. It covers better.
– Take the time to take everything off of the walls and ceilings before you get started.
– Wear clothes that can get paint on them.